EPOXY INJECTION FOR BASEMENT WATERPROOFING
Poor soil conditions, inclement climate and inadequate drainage system can lead to foundation damage. Any weakness in a homes’s foundation can compromise its structural integrity. These conditions can lead to unsightly scene, cause dampness and leakages as well as growth of mold into the interior of your basement.
The solution to this problem can be provided by Aquatech Waterproofing using a technology known as epoxy injection. Using power resin squeezed in the cracks of a building’s foundations can remedy the problem. This action not only restores the home’s aesthetics, it also mends any structural damage to the foundation. The resin welds the wall back together at strength greater than that of concrete.
WIDE APPLICATION
Applying resin to seal these structural cracks provides major savings on alternative construction repair methods. It can be used in walls of different materials.
SPECIFIC APPLICATION
For defective cracked foundations, a free consultation to assess the defects is provided by Aquatech Waterproofing. This provides detailed conditions report used to analyze the most effective and suitable solutions available.
EFFECTIVE AND FAST ACTING
This application is fast and effective, sealing the cracks, bonding the walls of foundations and spreading further to eliminate any future possible cracks. As well as time savings, it is also a non destructive method of repair.
The Epoxy Injection Method
Resin injection has a relative simplicity and fast action. These traits enable epoxy to still offer a strong and reliable solution that fully seals foundations. The application of the resin takes great dexterity in combination with competent application of the tools, thereby allowing quick fix to foundation cracks in a few hours. The application steps are as below:
- Step 1: Mounting injectors on the selected surface.
- Step 2: Infusion of epoxy paste at certain intervals, smearing the solution to cover the gaps around the injectors, thus leaving a good resin cover.
- Step 3: Once the surface layer is covered, application of resin is started from the bottom injector port, through careful infusion of the solution until it begins to appear in the port above.
- Step 4: Moving one step up, the solution is applied to the next port, filling all the crevices in the wall. When the resin seeps to the upper port, it has filled the cracks and has to be taken to the next crack.
- Step 5: This action is repeated until the top of the crack is reached.
- Step 6: After finishing, tidying up of the application site is done to make the wall is attractive and done to perfection.
Epoxy Injection Advantages and Features
Cracks in the foundation need immediate remedy to avoid expensive repairs. They are cost effective and offer permanent solution to the causes of the cracks rather than just covering them up. The benefits derived from epoxy injection include:
VERY EFFICIENT
Cracks can be sealed and waterproofed quickly and effectively.
COST EFFECTIVE
As remedies take a short time without the need to move household stuff and vacate the place under repair, it is thus very cost effective. Though the epoxy is expensive, its application is simple and cost effective.
HIGH STRENGTH WELD
The resin fills and welds the crack extremely well, making it stronger than concrete while waterproofing the walls too. It provides structural repair as well as cosmetic value.
Aquatech Waterproofing For Epoxy Injection
Aquatech Waterproofing offers high quality epoxy injection services. With a pool of well trained, qualified and experienced staff, working with professional grade epoxy, resin and equipment, you are rest assured that cracks on your foundation will be repaired, and your home left structurally sound.
PROUDLY SERVING
GREATER TORONTO FOR OVER 25 YEARS
Providing quality waterproofing services!
What Our Clients Have to Say
Testimonials







For more than 25 years we have serviced wet basement and leaky basements in Toronto for them to stay dry and keep water away.