Aqua-Bloc 770-06, also known as Bakor Aqua-Bloc 770-06, is a top-notch waterproofing membrane perfect for basement waterproofing and other applications. This one-component elastomeric product creates a strong, rubber-like layer when applied to surfaces like concrete and masonry. For dependable and long-lasting waterproofing, Bakor Aqua-Bloc 770-06 is the solution you need!
- Forms a smooth, rubber-like asphalt layer.
- Bonds well with common construction surfaces like concrete, stone, wood, cement, and metal.
- Stays flexible in various temperatures.
- Applies easily without needing special equipment.
- Resists mild acids, alkalis, salt, and calcium chloride solutions.
- Conveniently portable for use in tight or hard-to-reach spaces.
How Do You Use Aqua-Bloc?
Using Aqua-Bloc 770-06 for basement waterproofing involves these basic steps:
- Prepare the Surface: Make sure the surface is clean, dry, and free of debris or cracks.
- Apply Aqua-Bloc: Use a brush, roller, or sprayer to apply Aqua-Bloc evenly on the surface. You can also reinforce cracks and joints with Yellow Jacket fabric if needed.
- Allow to Dry: Let it dry and cure according to the product’s instructions.
- Inspect and Repeat: Check for any imperfections and apply a second coat if necessary.
- Clean Up: Clean your tools and work area using recommended solvents.
- Ensure Safety: Wear proper protective gear and work in a well-ventilated space.
Always follow the manufacturer’s instructions for best results and consider consulting professionals for larger or complex projects.
What Is The Coverage Of Aqua Bloc?
Aqua Bloc can cover an area of about 2.5 liters for every square meter (or roughly 6 U.S. gallons for every 100 square feet) when you apply it with a wet layer that’s at least 2.25 millimeters thick (which is about 90 mils). Keep in mind that the actual amount you’ll need might vary depending on the surface, how you apply it, and the environment, so it’s a good idea to follow the instructions from the manufacturer to get the best results.
What Is The Cost Of Aqua Bloc?
Small containers (e.g., 1 gallon or less) typically range from $20 to $50 or more, depending on the brand and product. For larger quantities (e.g., 5 gallons or more), prices can span from $80 to several hundred dollars. Keep in mind that these are rough estimates and can vary by location and supplier. For precise pricing, contact local suppliers, hardware stores, or check online retailers and the manufacturer’s website.
Aqua-Bloc 770-06 Elastomeric Liquid Membrane is a one-component elastomeric waterproofing membrane. It is applied in a single or reinforced application and cures through solvent evaporation to provide a heavy-duty, seamless, rubber-like, impervious membrane. Aqua-Bloc 770-06 can be trowel or spray applied.
AQUATECH BASEMENT WATERPROOFING TORONTO PROUDLY SERVING THESE AREAS FOR 20+ YEARS
Toronto GTA, Aurora, Barrie, Bowmanville, Brampton, Burlington, Cambridge, Cobourg, Collingwood, Caledon, East York, Etobicoke, Georgetown, Hamilton, Kawartha Lakes, Kitchener, King City, Leaside, Lindsay, London, Markham, Milton, Halton, Mississauga, Newmarket, Niagara, North York, Oakville, Oshawa, Peterborough, Pickering, Richmond Hill, Scarborough, St. Catharines, Toronto, Vaughan, Waterloo, Whitby, Uxbridge